2019 Latest Design 5 Inch Lcd - Small sized screen,H35C116-07W V08 – tsont Detail:
| Item | Typical value | Unit |
| Size | 3.5 | Inch |
| Resolution | 320RGB*480 dots | - |
| Outling dimension | 54.96(W)*83.24(H)*3.5(T) | mm |
| Viewing area | 48.96(W)*73.44(H) | mm |
| Type | TFT | |
| Viewing direction | All O’ Clock | |
| Connection type: | COG + FPC | |
| Operating temperature: | -20℃ -70℃ | |
| Storage temperature: | -30℃ -80℃ | |
| Driver IC: | ILI9488 | |
| Interfce type: | MCU&RGB | |
| Brightness: | 200 CD/㎡ | |
LCD TFT or ODF glass cutting produces flange solution
Causes and Solutions of Flange
1. The stroke of the cutter wheel is exceeded, and the cutter shaft of the cutter wheel is severely worn. This situation has been completely eliminated.
Through the upper and lower line control of the cutter wheel, the electronic file and paper file record the time, machine number, stroke, replacement person, etc.
data. During the cutting wheel stroke, the cutting section can be clearly visible.
2.The glue-like object is attached to the back of the SUB to be cut (source: gloves, transit TRAY tray) or platform
The glass debris on the platform and the platform have bumps.
The glass at the location of the foreign object is cushioned, the height is the highest point of the whole SUB, and a circle is formed around it.
The location of the object is the center of the circle, and the arch height from the center of the circle to the surroundings gradually decreases.
Condition 1 The cutter wheel walking on the edge of the padding area (that is, the circumference of the circle) will cause a smaller flange from the edge.
To the center of the circle
Condition 2. Colloid or glass debris is on the cutting line or the edge of the cutting line-____-can cause cracks or large
Of the flange.
Condition 3. The platform has small bumps. This condition will cause a fixed position, continuity, and the same scrap.
In response to this situation, we adopt the following methods:
1) When the flange condition occurs, the cutting station biotechnology first checks and repairs the operating platform to prevent it from appearing.
Continuous scrapping, after confirming that there is no problem with the platform, then analyze according to other thinking.
2) The latest written work instructions are in the process of implementation. Biotech personnel make irregular inspections to
And guide the blow platform action and time.
3) Require the production line supervisor to strictly require the operator to perform the operation in full accordance with the operation instructions and
carefully.
Product detail pictures:
Related Product Guide:
Cooperation
By using a full scientific excellent administration method, great quality and fantastic religion, we get good reputation and occupied this discipline for 2019 Latest Design 5 Inch Lcd - Small sized screen,H35C116-07W V08 – tsont, The product will supply to all over the world, such as: Cologne, Belgium, Palestine, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Tyler Larson from Tajikistan - 2018.06.21 17:11
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Aurora from Paraguay - 2018.06.18 17:25
